|
|
Productdetails:
Betalen & Verzenden Algemene voorwaarden:
|
| LCD Size: | 1.12inch(Diagonal) | Display Mode: | Normally black |
|---|---|---|---|
| Resolutie: | 50 ((H) RGB x 160 ((V) | Dot pitch: | 0.2184 (H) x 0.2184(V) um |
| Actief gebied: | 8.49 ((H) x 27.17 (V) mm | Module size: | 10.8(H) x 32.18(V) x2.11(D) mm |
| Kleurenregeling: | RGB V Verticale strook | Interface: | SPI4 LINE |
| IC-aandrijving: | GC9D01 | Luminance(cd/m2): | 300 (TYP) |
| Zichtrichting: | Alle weergave | Backlight: | 1 White LED |
| Operatieve temperatuur.: | -20°C tot + 70°C | Opbergtemperatuur: | -30℃~+ 80℃ |
| Weight: | 1.1g | ||
| Markeren: | 1.12 inch TFT LCD display module,IPS serial port screen with SPI,GC9D01 display module with welding pins |
||
| Aantekening | Waarde |
|---|---|
| LCD-grootte | 1.12 inch (diagonaal) |
| Afbeeldingsmodus | Normaal zwart |
| Resolutie | 50 ((H) RGB × 160 ((V) |
| Dot Pitch | 0.2184 (H) × 0.2184 ((V) μm |
| Actief gebied | 8.49 ((H) × 27.17 ((V) mm |
| Grootte van de module | 10.8 ((H) × 32.18 ((V) × 2.11 ((D) mm |
| Kleurenversnelling | RGB Verticale streep |
| Interface | SPI 4 LINE |
| Rijden IC | GC9D01 |
| Luminansie | 300 cd/m2 (TYP) |
| Zichtrichting | Alle weergave |
| Achterlicht | 1 Witte LED |
| Werktemperatuur | -20°C tot +70°C |
| Bergingstemperatuur | -30°C tot +80°C |
| Gewicht | 1.1 g |
1.12 inch Full-color ALL TFT LCD 300cd scherm met 50 × 160 Dot Array Display, met 4 IPS Serial Port Screen met IC GC9D01 Display Module en SPI Welding 13 Pin.
T112KTBIG41 is een 50RGB × 160 dot-matrix TFT-LCD-module bestaande uit een TFT-LCD-paneel, bestuurder-IC's, FPC en een achterlichtunit.
FPC-connector wordt gebruikt voor de module-elektronica-interface.
| Nee, dat is niet zo. | Symbool | Beschrijving |
|---|---|---|
| 1 | NC | Geen verbinding |
| 2 | NC | Geen verbinding |
| 3 | SDA | SPI-interface input/output pin |
| 4 | SCL | Signal zal het apparaat resetten en moet worden toegepast om de chip correct te initialiseren (actief laag) |
| 5 | RS | Toon gegevens/opdracht selectie pin in 4-lijn serie-interface |
| 6 | Reset | Signal voor het opnieuw instellen van het apparaat (actief laag) |
| 7 | CS | Chip selectie pin (laag inschakelen, hoog uitschakelen) |
| 8 | GND | Power Ground |
| 9 | NC | Geen verbinding |
| 10 | VDD | Stroomvoorziening voor analoog |
| 11 | LEDK | LED-kathode |
| 12 | LEDA | LED-anode |
| 13 | GND | Power Ground |
Contactpersoon: Mr. james
Tel.: 13924613564
Fax: 86-0755-3693-4482