7.0' 1024 X 600 एचडीएमआई टीएफटी एलसीडी डिस्प्ले एमआईपीआई सीरियल पोर्ट इंटरफेस आईपीएस स्मार्ट

Our next generation handheld medical devices require a compact but high-resolution display, and this 3.97-inch panel is perfect. The 480x800 resolution on the IPS panel provides excellent clarity, wide viewing angle, and precise color reproduction, which is crucial for our diagnostic UI. In fact, it is customizable in terms of installation and connector placement, which saves us a lot of design time. The MIPI interface keeps the circuit board layout clean. This is not a ready-made module; This is a customized component that feels very high-end. The ST7701S driver has detailed documentation, which is helpful for our firmware team. The top choice for designing critical applications.

We integrated this LCD into our company’s test equipment, and it’s been working reliably under different temperatures. I tested it in our lab from around 0°C to 40°C, and the display remained clear with no fading. The 5V power requirement is convenient, and the parallel interface is fast enough for our needs. The only minor thing is that the viewing angle is best from the bottom, but that’s acceptable for our setup.

Focus on Value for High-Resolution Applications (From a Hobbyist on a Complex Project) I used it for customizing smart home controllers and was impressed by its cost-effectiveness. It is rare to find a true 480x800 IPS pixel and modern MIPI interface~4-inch panel at such a cost. Rich colors and flawless perspective. In terms of customization, it means I can get it without a touch screen (saving costs) because I use a separate overlay. Using the correct adapter board to drive Raspberry Pi CM4 through MIPI is very simple. ST7701S is a common driver and therefore has community support. If you need a clear, small display for advanced projects that can handle MIPI integration, please don't wait and see.